Flat File Parser Validator Example

From MidrangeWiki
Revision as of 21:53, 29 January 2011 by Mihael (talk | contribs) (Created page with "== Purpose == This example shows how to validate data before passing it to the line processor. == Data Format == The data is read from a stream file on the IFS. The same for...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Purpose

This example shows how to validate data before passing it to the line processor.

Data Format

The data is read from a stream file on the IFS.

The same format as the one from the grouping example will be taken for this example.

1000001
1102010-12-20
2101234567890123
220450
999

Each line type is identified with an identifier (columns 1 - 3). A block of data begins and ends with a "special" line. This line can be fix or contain variable data.

In this case a complete block of data starts with a line with an identifier "100" and ends with a line with an identifier "999". So the starting line format has an image "100####" and the ending line format "999".

Line Formats

Identifier Data
Store ID 100 4 digits numeric
Date 110 date ISO format yyyy-MM-dd
Item 210 13 alphanumeric (EAN)
Quantity 220 4 digits numeric
End 999 no extra data


Concept

Each line format can be separated into fields. Fields lie always together. There are no spaces between fields. A validator is tied to at least one field for validation. The same validator can be declared to validate multiple fields.

The validator returns *on if the field is valid and *off if it ain't valid. If the validator throws an escape message the line will be flagged as invalid by the parser.

One field can have up to 99 validators.

Implementing a Validator

A validator is a module which conforms to the following requirements:

Interface

A validator must implement the following interface which means that on the create procedure it must return a pointer which points to the following data structure:

    D ffp_validator...
    D                 DS                  qualified template align
    D   id                          50A
    D   userdata                      *
    D   logger                        *
     *
    D   proc_validate...
    D                                 *   procptr
    D   proc_finalize...
    D                                 *   procptr
    D   proc_setLogger...
    D                                 *   procptr

The data structure can be found in the file _validator_t.rpgle_. All procedure pointers must be set or the implementation will be marked as invalid.

Procedures

A validator implementation must at least consist of the following procedures:

    D ffp_validator_finalize...
    D                 PR                  
    D  validator                      *
     *
    D ffp_validator_validate...
    D                 PR              N   
    D   validator                     *   const
    D   data                     65535A   const varying
     *
    D ffp_validator_setLogger...
    D                 PR                  
    D   validator                     *   const
    D   logger                        *   const

The procedure names doesn't matter as the procedure pointers to these procedures are stored in the interface data structure (see Interface).

On the finalize procedure all allocated resources must be freed (f. e. allocated memory freed and opened files closed).

Logger

The logger can be used to log messages. But it may be that no logger has been set. So don't expect there to be one. You don't have to take care of the fact that the logger may be *null. The logger service program accepts *null for a logger and drops the passed message.

Implementations

The framework is shipped with a range validator and a date validator.

Code

The code will be much the same as in the grouping example. A validator will be added to the line format, not to the parser. The line will have to be partitioned into fields. Then a validator can be added to the line format for a field.

Get line format

 lineFormat = ffp_getLineFormat(parser : 'quantity');


Partition line into two fields (see data format for quantity , 220)

 ffp_addLineFormatField(lineFormat : 3);
 ffp_addLineFormatField(lineFormat : 7);


Create validator

 checkRange = '1 99999' + x'00';
 validator = ffp_validator_range_create(%addr(checkRange));

Add validator for the quantity field (2)

 ffp_addValidator(lineFormat : 2 : validator);