Image Catalog

From MidrangeWiki
Revision as of 22:49, 8 June 2010 by Ddekreon (talk | contribs) (CD Images)
Jump to: navigation, search

Building an image catalog on the iSeries (thanks to Rob Berendt at Group Dekko Services, LLC for all the pointers)

Image Catalogs are simply a way of storing and using optical disk images instead of having to use the actual optical disks (CD's or DVD's).

.ISO images of the disk(s) are stored in a folder on the IFS called an image catalog. .ISO files cannot be simply copied into the folder: they must be added to it with special commands.

The image catalog is associated with a virtual optical drive by "loading" the catalog to the drive after it has been varied on.

The .ISO image currently "mounted" in the catalog is then available for use with LODRUN and RSTLIB commands. Another image can be mounted without varying the device off or unloading the catalog from it.

Aside from creating the virtual optical drive, all catalog functions can be done via the "work with image catalog" command, wrkimgclg.

Create Virtual Device

Create a virtual optical device to be used to contain the image catalog (you'll need to do this only once):

CRTDEVOPT DEVD(OPTVRT01) RSRCNAME(*VRT) ONLINE(*YES) TEXT('Virtual optical drive for image catalog')

Make the drive available (after you create it the first time only):

VRYCFG CFGOBJ(OPTVRT01) CFGTYPE(*DEV) STATUS(*ON)

Create Catalog

Create the image catalog to copy the images to:

CRTIMGCLG IMGCLG(PTFCATALOG) DIR('/fixes') CRTDIR(*YES) TEXT('PTF image catalog')

Note: You have to either create the directory first OR use the CRTDIR(*YES) option when you create the image catalog.

Load Images

At this point you will need to copy the images to the catalog folder using one of the following methods:

PTF's

  • If you downloaded the images using the FTP commands sent to you when you ordered your PTF's (online) you will use the following command for each .bin (binary) file in the folder.
    • ADDIMGCLGE IMGCLG(PTFCATALOG) FROMFILE('/fixes/TheFtp.binFileNameHere') TOFILE(*FROMFILE) REPLACE(*INSERT)
    • It will register the existing bin file to the image catalog.
    • This will save space by using only one copy of the image
    • (the TOFILE(*FROMFILE) parameter will do this IF the folder referenced in the FROMFILE is the same folder as identified in the DIR parameter in the CRTIMGCLG command)

CD Images

  • If you are copying a CD to the catalog, use the following command:
    • ADDIMGCLGE IMGCLG(YourImageCatalogNameHere) FROMDEV(YourOpticalDevice NameHere)
    • 'Load' the image catalog into your virtual drive: LODIMGCLG IMGCLG(PTFCATALOG) DEV(OPTVRT01)

.ISO files

  • If you are copying an uploaded ISO image to the catalog, use the following command:
    • ADDIMGCLGE IMGCLG(PTFCATALOG) FROMFILE('/fixes/TheUploaded.ISOFileNameHere') TOFILE(*FROMFILE)

You can convert a CD into a .iso with commercial products like Roxio or free ware like ISO Recorder (for Windows).

Linux systems can convert discs to .iso with the command

  cat /dev/scd0 > /home/test.iso

Ubuntu comes pre-loaded with Brasero, a GUI utility that can carry out virtually any task involving optical media including creating ISO images.

Catalogs

Verify

    • Verify that all is well with the loaded catalog: VFYIMGCLG IMGCLG(PTFCATALOG) TYPE(*PTF) SORT(*YES)

Work With

    • Work with the contents of the image catalog WRKIMGCLGE PTFCATALOG (if you need to change something like the order of the images)
    • 'Load' the image catalog into your virtual drive: LODIMGCLG IMGCLG(PTFCATALOG) DEV(OPTVRT01)

Using a Catalog

Loading PTFs

Run your PTF option as follows, using the Virtual Optical drive ...

  • GO PTF
  • option 8 (Install program temporary fix package)
                 Install Options for Program Temporary Fixes 
                                                         System:   GDI 

Type choices, press Enter.

 
  Device  . . . . . . . . .   OPTVRT01     Name, *SERVICE 
 
  Automatic IPL . . . . . .   N            Y=Yes 
                                           N=No

You can load as many image catalogs as you want (as space permits) so that you could create a series of image catalogs for sequential loading as follows: Create the directories for the image catalog:

md '/fixes' 
md '/fixes/cume' 
md '/fixes/SF99529' 
md '/fixes/SF99269'

Create the image catalogs:

CRTIMGCLG IMGCLG(CUME) DIR('/fixes/cume') 
CRTIMGCLG IMGCLG(SF99529) DIR('/fixes/SF99529') 
CRTIMGCLG IMGCLG(SF99269) DIR('/fixes/SF99269' ...

Add image catalog entries for each as listed above.

Then you just run multiple ...

  • LODIMGCLG IMGCLG(CUME) DEV(OPTVRT01) OPTION(*LOAD)
  • GO PTF
  • Option 8
  • no ipl
  • LODIMGCLG IMGCLG(CUME) DEV(OPTVRT01) OPTION(*UNLOAD)
  • LODIMGCLG IMGCLG(SF99529) DEV(OPTVRT01) OPTION(*LOAD)
  • GO PTF
  • Option 8
  • no ipl
  • LODIMGCLG IMGCLG(SF99529) DEV(OPTVRT01) OPTION(*UNLOAD)

... And so on.

Loading Other Software

Use LODRUN DEV(OPTVRT01) after mounting the particular image in the catalog you want to use.

Note: you have to manually change the mounted image (from another session) when a "mount next CD" prompt appears. Image catalogs will not automatically advance from one entry to the next, as they do for PTFs.

Categories