Difference between revisions of "SSD"

From MidrangeWiki
Jump to: navigation, search
m (new page for Solid State Drive like SAS)
 
 
Line 4: Line 4:
  
 
As of August 2009, it is only one of two types of internal hard drives sold by IBM for the AS/400, the other being [[SAS]].<ref>"Reconsidering SAN in Wake of SCSI Disk's End" by Alex Woodie, The Four Hundred, Volume 18, Number 30 -- August 17, 2009. [http://www.itjungle.com/tfh/tfh081709-story03.html]</ref>
 
As of August 2009, it is only one of two types of internal hard drives sold by IBM for the AS/400, the other being [[SAS]].<ref>"Reconsidering SAN in Wake of SCSI Disk's End" by Alex Woodie, The Four Hundred, Volume 18, Number 30 -- August 17, 2009. [http://www.itjungle.com/tfh/tfh081709-story03.html]</ref>
 +
 +
Only [[Files#Physical_Files | Physical Files]], [[Files#Source_Physical_Files | Source Physical Files]], and [[Files#Logical_Files| Logical Files]] can be stored on SSD storage device.  Use the UNIT parameter to specify *SSD as the preferred storage unit.
 +
 +
Oddly enough, you do NOT need to actually have SSD's installed to specify the preferred storage unit on a file.  Since the system automatically manages where data is stored, the the UNIT parameter only indicates the 'preferred' storage unit.  If there is no space available on a SSD, and you have set the UNIT parameter to *SSD, it will not try to move the file to a SSD. 
 +
 +
If you do not have any SSD's installed, the preferred storage unit parameter can be set ... but, since there is no SSD space available, the system will not move the object.
  
 
==References==
 
==References==

Latest revision as of 20:53, 24 November 2010

See also on Wikipedia: Solid-state drive

SSD is an acronym which stands for Solid State Drive, a type of internal hard disk drive.

As of August 2009, it is only one of two types of internal hard drives sold by IBM for the AS/400, the other being SAS.[1]

Only Physical Files, Source Physical Files, and Logical Files can be stored on SSD storage device. Use the UNIT parameter to specify *SSD as the preferred storage unit.

Oddly enough, you do NOT need to actually have SSD's installed to specify the preferred storage unit on a file. Since the system automatically manages where data is stored, the the UNIT parameter only indicates the 'preferred' storage unit. If there is no space available on a SSD, and you have set the UNIT parameter to *SSD, it will not try to move the file to a SSD.

If you do not have any SSD's installed, the preferred storage unit parameter can be set ... but, since there is no SSD space available, the system will not move the object.

References

  1. "Reconsidering SAN in Wake of SCSI Disk's End" by Alex Woodie, The Four Hundred, Volume 18, Number 30 -- August 17, 2009. [1]

Categories